大型升降平臺通常情況下有臺面大、承重大、升高大三種，不同的大，要注意的問題也不相同，下面有關技術人員就給大家介紹一下。

1、大型升降平臺臺面大：臺面過大的話會造成貨物擺放不聚中，造成的平臺一側傾斜，所以要注意在使用的時候把貨物放置到中間的位置。
Too large, then the table will cause their goods do not gather, causing the platform side of the tilt, so be careful when using the placing of goods to an intermediate position.

2、大型升降平臺承重大：承重大的設備在向上搬運重物的時候要注意物品的擺放，另外要注意使用時間的增加，平臺的承重也會有所下降，所以要定期的測量平臺的承重能力。
For major equipment when carrying heavy loads of up to pay attention to the placing of objects, in addition to pay attention to the increased use of time, the load-bearing platform will decline,so regular measurement platform load-bearing capacity.

3、大型升降平臺升高大：升降高度較高的設備會造成設備的軸承的磨損加大，所以我們在使用的時候一定要注意定期的保養和檢查，發現磨損過大的軸承要立即進行更換。
The height of the device will result in higher bearing wear devices increase, so we must use the time to pay attention to regular maintenance and inspection, found excessive wear of the bearings should be replaced immediately.

4、大型升降平臺在使用的時候更要注意設備的穩定性和安全性，它的保養和檢查要比普通的設備更為嚴格。
Use the time to pay attention to the stability and safety of the equipment, its maintenance and inspection of equipment is more stringent than the average.