圓錐配合是指通過相互結合的內、外圈錐規定的軸向位I來形成間旅或過盈。必須控制內外圓錐的圓錐角偏差和形狀誤差，基面的距離變化應控制在允許的范圍內。圓錐配合不是單一尺寸配合，影響圓錐配合精度的不僅僅是目錐直徑尺寸誤差.而且還有圓錐角誤差。
Wenzhou cone refers to the formation of complexes between the trip through the inner and outer cone specified axial position I mutually binding or interference. Must be controlled inside and outside the cone angle of the conical shape error and the deviation from the variation of the base surface should be controlled within the allowable range. Tapered fit with not a single dimension,affecting not only the accuracy of the cone with cone diameter mesh size error. But also the cone angle error.  
貨梯圓錐配合能保證結合件自動定心，它不僅能使結合件的軸線很好地效合，而且經多次裝拆也不受影響。在配合中，通過調整內、外圈錐的軸向相對位工，可以改變其配合間晾或過盈的大小，得到不同的配合性質。貨梯圓錐配合吸密而且便于拆卸，能夠傳遞一定的轉矩，甚至可以取代花鍵結合，使傳動結構簡單、吸湊。
Wenzhou freight cone with automatic centering pieces combine to ensure that it not only can combine pieces together the axis of good effect, but after repeated assembly and disassembly are also affected. Mating through within the adjustment, the axial relative position of the outer cone of the workers, which can vary between dry or interference with the size obtained with different properties. Wenzhou freight cone with suction dense and easy to disassemble, be able to pass a certain torque, or even replace the spline coupling, so that transmission structure is simple, smoking hash.